Shop headings: New Spares | Used Spares | Accessories | Brands
Complete right hand PHF 30 carb, supplied ready to fit with cable adjuster. Suitable as a replacement for the discontinued square slide VHB30 carb
Jetted to suit your model.
M48 x 1.25 Threaded air intake connection.
44mm Rubber sleeve type engine connection.
Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 28112644 and 28112600.
Use FUA30611 manifold kit. For cables use CAA17562 with standard plastic twinpull twistgrip or CAA20000 with Tommaselli 2C twistgrip
This part is available by special order, request a quote
28112610 GU28112610 28 11 26 10
2811 2610 2811.2610 28.11.26.10
£333.00
INC VAT
£277.50 EX VAT
Complete left hand PHF 30 carb, supplied ready to fit with cable adjuster. Suitable as a replacement for the discontinued square slide VHB30 carb
Jetted to suit your model.
M48 x 1.25 Threaded air intake connection.
44mm Rubber sleeve type engine connection.
Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 28112645.
Use FUA30611 manifold kit. For cables use CAA17562 with standard plastic twinpull twistgrip or CAA20000 with Tommaselli 2C twistgrip
This part is available by special order, request a quote
28112611 GU28112611 28 11 26 11
2811 2611 2811.2611 28.11.26.11
£333.00
INC VAT
£277.50 EX VAT
Dellorto K23 slide needle for PHF 30 - PHF 36 and PHM 40 carbs
Standard needle clip position is 3rd groove from top
This part is available by special order, request a quote
28937711 GU28937711 28 93 77 11
2893 7711 2893.7711 28.93.77.11
£12.00
INC VAT
£10.00 EX VAT
Dellorto AB268 needle jet or atomiser
This part is available by special order, request a quote
28935550 GU28935550 28 93 55 50
2893 5550 2893.5550 28.93.55.50
£8.00
INC VAT
£6.67 EX VAT
Dellorto K18 slide needle
Standard needle clip position is 3rd groove from top
This part is due back in stock soon, call 01484 841395 to reserve yours
£13.10
INC VAT
£10.92 EX VAT
Inlet rubber with HT lead guide. Fits between inlet manifold on cylinder head and throttle body or between throttle body and airbox
Also known as Guzzi ref. 03114370, 29114360. Use clip SSA45970.
Please note that if you are fitting this as a replacement to FUA30470 you may need to make some modification to the end of your airbox nozzle for a secure fit
This part is due back in stock soon, call 01484 841395 to reserve yours
30114370 GU30114370 30 11 43 70
3011 4370 3011.4370 30.11.43.70
£13.00
INC VAT
£10.83 EX VAT
Fuel pipe / hose assembly including 'T' junction
This part is available by special order, request a quote
30106570 GU30106570 30 10 65 70
3010 6570 3010.6570 30.10.65.70
£67.00
INC VAT
£55.83 EX VAT
Fuel return hose
This part is available by special order, request a quote
30108770 GU30108770 30 10 87 70
3010 8770 3010.8770 30.10.87.70
£88.90
INC VAT
£74.08 EX VAT
K&N high performance air filter
This part is available by special order, request a quote
28113660-z 28113660 GU28113660 28 11 36 60
2811 3660 2811.3660 28.11.36.60
£67.00
INC VAT
£55.83 EX VAT
Manually operated fuel tap or fuel valve for models with carbs. Includes cable and remote side panel mounted knob
These new taps have a linkage that may be shorter than the original tap. In this case, you will need to swap over the linkage from your old tap and re-use it. Before using the tap you will need to release it by rotating the brass section behind the tap by quarter of a turn (anti-clockwise)
This part is due back in stock soon, call 01484 841395 to reserve yours
29105450 GU29105450 29 10 54 50
2910 5450 2910.5450 29.10.54.50
£35.00
INC VAT
£29.17 EX VAT